Samsung Note 2 GT-N7100 Philz Recovery & Root

Samsung recently rolled out the much-awaited Android 4.4.2 KitKat update for the international variant of Galaxy Note 2 (GT-N7100) with a handful of improvements including faster UI performance, graphical enhancements and updated apps alongside a bunch of new features including Samsung's KNOX security.

Those who have already installed the latest official firmware from Samsung and want to restore root access on their device can follow our step-by-step guide given below.

Note: Rooting is essential to install third-party root apps, latest custom ROMs and system tweaks for optimum system performance.

IBTimes UK reminds its readers that it will not be held liable for any damage to device during or after root installation. Users are advised to proceed at their own risk.

Pre-requisites

1. Install necessary USB Drivers for Galaxy Note 2 N7100 on the computer.

2. USB Debugging Mode should be enabled on the phone by navigating to Settings >> Developer Options.

3. Back up your important data to avoid potential data loss during root installation.

4. Ensure the phone is factory unlocked (not locked to any specific carrier).

5. Verify Galaxy Note 2 has at least 80 percent battery charge.

6. The rooting tool provided in this guide is only compatible with Galaxy Note 2 (GT-N7100). Do not attempt installing it on incorrect variants as it may brick the device. Verify the model number of the Galaxy Note 2 by navigating to Settings >> About Phone.

Downloads Required

Odin v3.09

SuperSU update

Philz Touch Recovery for Note 2 N7100

Steps to Root Galaxy Note 2 N7100 Running on Android 4.4.2 KitKat Stock Firmware and Install Philz Touch Recovery

1. Copy the SuperSU update.zip file to your Galaxy Note 2.
2. Now power off your phone and boot it into the Download Mode by pressing and holding Volume Down, Home and Power buttons together. Hold the buttons until the screen powers on and the warning screen appears. Then tap Volume Up key to enter Download Mode.
3. Open the Odin folder and launch SuperSU.
4. Now connect your device to the computer via USB cable.
5. Wait until the "Added!" message appears in Odin and the ID:COM box turns light blue.
6. Click the AP button and choose philz_touch_6.26.6-n7100.tar.md5 file.
7. Uncheck the Auto Reboot option on Odin.
8. Now hit the Start button to begin root installation.
9. Wait until the installation completes and soon a PASS message with green background should appear in Odin. PhilZ CWM recovery has now been flashed to your phone.
10. Now unplug the USB cable, remove the back cover and take out the battery.
11. Wait for about 30 seconds before reinserting the battery.
12. Now boot the device into recovery mode. Press and hold Volume Up, Home and Power keys together until the display turns on and the Samsung logo flickers and disappears. Now release the Power button but continue holding other keys till your Note 2 boots into PhilZ recovery mode.
13. Browse to Install zip from sdcard option, navigate to UPDATE-SuperSU-vx.xx.zipand select it.
14. Confirm the installation and when the file is flashed to the device, return to the main menu in recovery.
15. Hit Reboot system button once the root installation is complete.

Your Galaxy Note 2 will reboot. Wait till it boots to the home screen and then go to the app drawer. Check for SuperUser app there and launch it. As Note 2 comes preinstalled withKNOX on it, you might see the following message:

"Samsung Knox has been detected. This might limit root capabilities and cause annoying popups. Try to disable KNOX."

Hit OK. You will now see the message KNOX has been successfully disabled. To further verify root access, download and install Root Checker app from Google Play store and run it.

Troubleshooting (courtesy XDA Developers)

Problem#1: If you keep getting SuperSu has stopped notifications constantly then follow these steps to fix:

• Uninstall SuperSu (Dont worry you won't lose root access)
• Now download SuperSu again from playstore
• Doing this installs SuperSu on /data/app partition where it won't get stopped by KNOX

Problem#2: If Fix no1 doesn't work for you then try this out:

• Download Terminal Emulator from the playstore.
• Launch it and type the following code:

su
pm disable com.sec.knox.seandroid

Note: This will disable the Knox apps which prevent SuperSu from running

Problem#3: If none of the above steps work to disable Knox. Then try the following:

• Using any Root Explorer go to /system / app & / system / priv-app and delete all the apps having the word Knox in it. Also delete their corresponding odex files.
• This should work without fail. But doing this modifies your system partition and you may lose OTA functionality temporarily.

Flashing Custom ROMs and Recover "almost bricked" looping phone SPICE

Guide to Flashing Custom ROMS.

1. Flashing ROM from Phantom ( come in NB0 format )
Just download and install SUT LR from here ( Software Update Tool )
http://uploading.com/files/7942c5ef/SUTLR_v1.7.0.zip/

2.Then connect ur phone and make sure all its driver installed. (need connection to internet to complete driver installation.. (Windows 7 64bit )

3. Start ur phone in DOWNLOAD MODE..
(Download Mode: Hang Up + Vol Up + Power)

4. Start SUT from ur PC, then choose .nb0 file from where u put it.. :)
start flashing.. ( choose clear data if 1st time try, got problem )

In case still got error, just follow guide to recover back to stock 2.1 ROM below
Happy Flashing and lets Spread the Words..

DONE.




WARNING!!! .. pls restore ur Spice to stock ROM before proceed!!!
(this only for flashing ROM in .zip format )
1. download z4root, copy to ur SD Card, install then root n reboot
2. download clockwork rom manager,copy to ur SD Card  and install Flash ClockWork Recovery
3. partition SD card (for Swap n Apps2sd ) (this will erase all ur data pls make BACKUP to PC )
   can use 256MB/ 512MB for EXT and 64MB for swap
4. download ur custom ROM and put into SD card.
5. open ROM Manager and choose Install ROM from SD Card.
  ( choose backup ROM and Wipe Data/ Cache )
6. download Google Apps, copy to ur FORMATTED SD card,
    turn off Handphone, start in recovery mode, (Recovery Mode: Vol Up + Camera + Power)
    choose install form zip, find that Google Apps file,
    wait couple of second, it will reboot itself..
    Reboot u will be greeting by all new splash screen..

7. In case u wanna turn back to stock ROM, just open clockwork, choose restore from Backup
    and voila u're back to stock again.

UPDATED: so far the best ROM for me is Phantom King Rev2..
so just get it guys..
http://uploading.com/files/m9db1mbd/phantom.king.rev2.rar/




GUD Luck..

!! Do At Ur Own Risk !!

i think thats it..


Resource : A Must Have Tools

A: Software Update Tool
http://uploading.com/files/7942c5ef/SUTLR_v1.7.0.zip/
(choose nb0 file from B ) below

B: ROM for stok SPICE Mi300 INDIA..

http://uploading.com/files/2d728341/MI-300-Eclair-Software-Updater-Tool.zip/

after installation complete, dont close that SUT yet
go
C:\Program Files (x86)\Software Update Tool Setup
take that nb0 and save at other place..
(somewhere safe) coz when u close that SUT, it wil delete that nb0

C: z4root ..easiest ROOT of them all (just copy to ur SD n install from there )
http://www.mediafire.com/?6fj3jn9ugd69239

D: Clockwork ROM Manager
http://www.mediafire.com/?y4mwjijm1xtyl5b

E: ur ROM of Choice
 choose here.. Nightly build but stable enough to use daily
http://mirror.teamdouche.net/?device=z71
latest
http://uploading.com/files/52m38b16/CyanogenMod-7_EAv4_nb0.rar/
this Cyanogen Mod 7 is working fine for me...its 2.3 Gingerbread!!

Phantom ROM. (i prefer this than Cm7 ROM)
the great one.
http://dl.dropbox.com/u/5851536/Phantom/Last.pdf


Latest : MygingerB Gaia. The Best so far for Mi300
http://forum.lowyat.net/topic/2055083/all
(please install CM7.1 first then update to this GAIA..)


F: Google Apps. A Must for nightly build ROM. dont need for phantom and full CM7 EAv4
http://www.mediafire.com/?bupx532u98cfrj9

G: CSL Mi300 (Malaysia ) stock ROM ( taken from clockwork Mod Backup )
(updated : this ROM wont restore back our CSL boot logo.. so for now we still helpless )
any gentleman who know how to do it.. pls post some comment below..
thanks
Official Malaysia CSL ROM v2.2 Froyo
http://www.mediafire.com/?2fm21s3o54ph2i3


Official Spice Mi300 v2.1 Eclair
http://www.mediafire.com/?lx5n3ci28u4mhuw


EXtra Guide

1. http://www.addictivetips.com/mobile/how-to-install-a-custom-recovery-to-an-android-phone-device/
2. http://www.noobsters.com/forum/showthread.php?p=173554
3. http://boston-mania.blogspot.com/2010/11/updated-clockworkmod-recovery-v2511-for.html#comments

How to  Recover back to Stock ROM

1. press HANG UP soft button, VOLUME UP and POWER to enter Download mode.

2. and your phone is entering Download mode with something iterate with black background screen, i am so panic at that time almost fainted ;-p

3. Open up the RUT application and browse nb0 file that you need to install to your phone.

4. you can see "Next" button on RUT application, it means your phone is detecting.

5. RUT will warn you that your phone is in download mode, just click Confirm

6. click Next on RUT application, wait until finished.

7. RUT will said that failed to update flash ROM.

8. turn off your phone and remove the battery

9. go to Recovery Mode -- DIFFERENT with DOWNLOAD MODE, recovery mode is : Vol UP + Camera + Power.

10. Open RUT Application and connect the USB

repeat the procedure to install nb0 file

11. wait until finished and successfully update.

12. unplug the phone, and remove the battery

13. do the Master Reset with the following: Hang UP + Camera + Power

14. wait until your phone will restart automatically

15. you will get your phone.

good luck

but Please to bear in mind it's on your OWN RISK.

i cannot guarantee, but it works with my phone. i almost tried many ways to get my phone back and this is the successful one.

bbandarena@gmail.com

===================================

TIPS about Android Mode

===================================

Recovery Mode: Vol Up + Camera + Power

Download Mode: Hang Up + Vol Up + Power

Master Reset: Hang Up + Camera + Power

Fastboot Mode: Hang Up + Vol Down + Power

FTM Mode: Vol Up + Vol Down + Power

How to Flash Your Spice Mi300, CSL Mi300, Boston Orange,

HOW TO RESTORE STOCK CSL BOOT ANIMATION

thanks to GreenJellyBean

[quote=GreenJellyBean,Mar 22 2011, 02:41 PM]

ok, i just successfully changed the bootanimation.

FYI, I am still using stock 2.1 and I manage to change the bootanimation to something else and change back to CSL stock animation with the steps below.

1. Find a boot animation, in my example I am going to use one I dload off the net (see attachment below bootanimation.zip).

2. You phone must be rooted and has Super Manager (any Root Explorer will do).

3. Connect your phone to usb, mount the card and copy the bootanimation.zip to the root of the card.

4. Unplug USB, start Root Explorer and cut the bootanimation.zip (you will need to paste it into another folder later).

5. Browse to "/hidden/data/Power-on Animation" folder, you must have root access granted to root Super Manager to see this folder, it is hidden by default).

6. There is a existing bootanimation.zip there, rename it to existing bootanimation-csl.zip to backup

7. Paste the bootanimation.zip you copied in step 4.

8. Shutdown your phone.

9. Turn it back on and voila, new bootanimation.

p/s: fyi there is a shell script in "/hidden/data/Power-on Animation" that automatically copies the bootanimation.zip to /local/data. Earlier I was trying to paste into /local/data and it kept getting replaced.

hope this will help you all claim warranty :) or custom rom freely without worrying about warranty.

[right][snapback]40930108[/snapback][/right]

[/quote]

Bootanimation.zip file

http://forum.lowyat.net/index.php?act=Attach&type=post&id=2110174

Not Required.

The latest versions 3+ of ClockworkMod Recovery have been out for a while now but at the moment, there is no direct way to install them to your Android device using ROM Manager. Fortunately, a quick hack allows you to change that and easily install any version of ClockworkMod Recovery to your device directly from ROM Manager.

For those of you who aren’t familiar with ClockworkMod Recovery, it is a custom recovery image for your Android device that lets you perform advanced installation, recovery and maintenance operations on your device. You can find more details at our coverage of what is ClockworkMod Recovery and how to install it.

The latest major release of ClockworkMod recovery is 3 and while it is available for several Android devices, trying to install ClockworkMod recovery through ROM Manager will result in the latest 2.x recovery being installed instead of 3.x. While version 2 works great for most purposes, version 3 is required to install CyanogenMod 7 nightly ROMs on your device that we have been featuring here lately.

Fortunately, with a quick file rename hack, you can trick ROM Manger into installing ClockworkMod Recovery 3.x on your device. Here is the complete method:

Requirements:

• Your device must be rooted. In case it isn’t, see our guide on how to root your Android device.
• You must have ROM Manager installed. If it isn’t, install it from the Android Market.

Method:

1. Download ClockworkMod Recovery 3.x for your device and copy it to your SD card.
   Note: Make sure that it is in .img format and in case the file you downloaded was zipped, extract the .img file from it first and use that rather than the zip file.
2. Launch ROM Manager and tap the first option that says ‘Flash ClockworkMod Recovery’ and confirm the name of your device. This will install the latest 2.x version of ClockworkMod recovery on your device.
3. Launch File Manager, browse to the location where you copied the recovery in step 1 and copy it.
4. Now browse to sdcard > clockworkmod > download > koush.tandtgaming.com > recoveries.
5. There will be a file with a name similar to recovery-clockwork-2.5.1.3-vision.img. The part of the version number after ‘2’ could be different and instead of ‘vision’, it might say something else depending on your phone model.
6. Rename that file by adding something to the end of the extension that you will later remember. We added .bak to it and it is now named recovery-clockwork-2.5.1.3-vision.img.bak.
7. Now paste the 3.x version recovery there that you copied earlier in Step 3.
8. Rename this file to the name the previous file had before you renamed it in the last step. This is very important, as in case of the name being even slightly different, this trick will not work. In our case, we renamed it to recovery-clockwork-2.5.1.3-vision.img
9. Close File Manager and launch ROM Manager again.
10. Tap on the first option again to flash ClockworkMod recovery. It will ask for the name of your device again, which you should confirm. Wait patiently while the recovery is flashed and you’re done.

You will still see the previous version of recovery in ROM Manager but in fact it is the new 3.x version with that old file name. From now onwards, booting into recovery will get you to ClockworkMod 3.x recovery with the orange text and you can use it to flash CyanogenMod 7 ROMs to your device.

Note: Due to the number of Android devices for which ClockworkMod Recovery 3.x is available, we can’t give all the download links here. This is also due to the fact that the official ClockworkMod Recovery website is under construction and we have to search a lot to look for the recovery’s yet unreleased 3.x version for many devices. For now, you will just have to search for a version for your device on your own. We will soon be featuring a mirror download list of the latest ClockworkMod Recovery 3.x versions for all the devices that we can find and will then update this post with a link to that list, so stay tuned

FB Profile

Please add bit.ly/bbandarena or bit.ly/tj-7 for any inquiry of Filestream.me

How To Set Up DiGi Broadband

Hi, I'm writing this guide for the benefit of those who want to try applying for DiGi Broadband but don't want the hassle of bringing it to a DiGi Service Center for installation. I faced the same problem and there was nothing here to guide me so I had to learn it the hard way, but now that I've succeeded in connecting, I'd like to share the method with you.

1. Apply for DiGi Broadband by calling DiGi (016-2990000), assuming you are on DiGi Postpaid and are the primary subscriber.
2. Request for the settings to your phone, accept and install, set as default.
3. Go to your phone web settings (in the case of my MotoV3x, Menu-Webaccess-Web Sessions), there should be an entry "DiGi Wap" there. Under "Options", create a New websession.
4. Enter the name as "digi", GPRS APN as "diginet", leave others blank or as it is. Save and exit.
5. Go back to the websessions menu, set your new "digi" as default.

6. Connect your phone to your computer as a data connection (not as memory card - if your phone has the ability)
7. Right click My Computer, Manage
8. Left click Device Manager, under Modems, double-click your phone (Assuming you have installed all drivers for your phone on your computer)
9. Your phone modem properties should show up. Under the Advanced tab, type in this Extra Initialization Command: +cgdcont=1,"ip","diginet"
10. Click Ok and exit all windows.

11. Create a new dial-up connection (Network connections-Create a new connection-Connect to the internet-Set up my connection manually-Connect using a dial-up modem-ISP Name "DiGiNet")
12. Enter in the phone number *99#
13. Leave username and password blank, save and exit.

14. You should be able to connect to the internet  

Writing this guide by memory so if there's a step that I missed please do let me know so I can amend the guide, if you encounter problems try calling DiGi first, or you can post here I'll try to answer, but I don't come to this part of the forums very often so my response might be slow, but I'll try nonetheless. All the best!

We are the reseller of filestream.me
we accept
Maybank
Cimb
RHB
BSN
Public Bank

You may whatsapp us at 0134930930
best price for all!

How to Extend your Hotlink & Celcom Validity - Cara Panjangkan Tempoh Sah Kredit Hotlink & Celcom

For HOTLINK/ MAXIS :

• Dial *100#
• Choose 6, MY ACCOUNT
• Choose 2, ACCOUNT INFO
• Then , choose VALIDITY (6)
• Choose 1 or 2..
  1 : valid 90: RM8.00
  2 : valid 365 RM 33.00

For CELCOM: 

• type EXP1 send to 28882 – RM30 for 1 year.
• EXP2 send to 28882 – RM50 for 2 years.
  **additional info : make sure credit is RM30 within 6 months after activation.

APN for DIGI

Provider: DiGi
APN: digimms
APN name: mms
APN password: mms
WAP gateway: 203.92.128.160
MMSC: http://mms.digi.com.my/servlets/mms